A video wall set flush into a wood slat wall, showing a black horseImage: Just Video Walls

For architects, designers and builders

Draw the wall before you frame it

A video wall is a piece of the architecture. We size it from your plans and give your team one detail to build from.

When to bring us in

Three points in the project

1

Design

We size the wall from the elevation and the seating, pick the pixel pitch, and mark up the wall section.

2

Before framing

You get a dimensioned detail: finished opening, recess depth, blocking, weight, power, heat load and conduit.

3

After finishes

We install the panels, calibrate the picture and tie the wall into the home's control system.

What goes on the drawings

A flat, strong wall

The panels weigh 4.6 to 9.3 pounds for each square foot, before the mount. Your builder frames and blocks the wall behind them, and keeps it flat.

Depth for a recess

Panels run from 0.6 to 3.7 inches deep, plus the mount. Set the recess in framing and the picture sits flush with the finished wall.

Power

Peak draw runs from 22 to 72 watts for each square foot. We give your electrician the maker’s numbers, and the electrician sizes the circuits.

A path for heat

All that power becomes heat, and about half leaves from the back of the panels. A recessed wall needs air behind it and a way out.

A path to the rack

The processor and the sources sit in the equipment rack. Conduit from the rack to the wall carries the picture and leaves room for what comes next.

Service from the front

On most walls, a panel comes out from the face, one at a time. The wall can sit against solid framing with no room behind it.

Makers we work with: AWALL, Barco, Just Video Walls, Megapixel, Samsung and Sony. We pick the maker after we know the room.

Video wall planner

See your wall before you build it

Size, pixel pitch, resolution and power for the wall you have in mind, from the makers' published numbers.

Plan your wall

Pick a shape, set the width, and tell us how far back you sit. The drawing is to scale.

Width

Height6'9"Set by the shape. Pick Custom to change it.

Seats

Seats: the distance from the wall to where you sit most.

12'6'9"5'9"7' sofa

Drawn to scale from your numbers. Mounting height is set in design.

Diagonal165in12' wide by 6'9" high, 81 square feet. The area of 3.8 85-inch TVs.
Pixel pitch1.4to1.9mmThe spacing between pixels that suits seats 14' back. Closer seats need a finer pitch.
Resolution1,925x1,083At 1.9 mm, Full HD or better. At 1.4 mm it is 2,613 x 1,470.
Power at full white1,800to5,800W15 to 49 amps at 120 V. Typical viewing draws 1,000 to 2,650 W.

The panels for this wall weigh 370 to 750 lb before the mount. These are planning ranges across the makers we work with. We size the final wall to the maker's cabinet, so the width and height can move by a few inches.

Send this wall with your project

Design team questions

All questions and answers

When should we bring AudioWorks in on a video wall?

During design, before framing. The recess depth, the blocking, the power and the air path all go on the drawings. After drywall, each of those is a change order.

What do you need from the plans?

The elevation of the wall, the wall section, the seating layout and the location of the equipment rack. From those we size the wall, pick the pixel pitch and mark up the recess, power and conduit.

What do you give the design team?

A dimensioned detail for the wall you choose: finished opening, recess depth, blocking, weight, power, heat load and conduit. Your electrician and mechanical engineer size their work from it.

Can the wall sit flush with millwork or stone?

Yes. The panels come out from the front, so the wall can sit in a recess with a tight reveal. We give the millwork or stone shop the finished opening for the wall you choose.

Can a video wall go in a room with a lot of glass?

Yes. A video wall makes its own light, up to more than 1,800 nits on the brightest lines, so daylight does not wash it out the way it does a projector. We still ask where the windows are, because direct sun on any screen causes glare.

Send us the project

We come back with notes on the wall for your team, then a quote.

1. The project
2. What the wall is for

Pick all that fit. Nothing is final until we talk it through.

We use this to call you back. Nothing else.